ITT Pure-Flo multiport divert valve.
Pure-Flo multiport divert valves place two through six diaphragm-valve weirs in one block so process fluid can be diverted, mixed, sampled, drained, or isolated from a compact valve station. The integrated design reduces contact area, hold-up volume, piping envelope, system welds, and the complexity of a conventional transfer panel.
What ITT Pure-Flo multiport divert valve is—and where it fits.
Pure-Flo multiport divert valves place two through six diaphragm-valve weirs in one block so process fluid can be diverted, mixed, sampled, drained, or isolated from a compact valve station. The integrated design reduces contact area, hold-up volume, piping envelope, system welds, and the complexity of a conventional transfer panel.
Where it fits
Use multiport divert bodies for process distribution, CIP routing, pump changeover, buffer switching, and compact transfer functions. The number of ways, common port, outlet pattern, valve sequence, drainability, and actuator clearance all must follow the P&ID.
What to confirm
Valve size, end connections, orientation, drain angle, material, surface finish, diaphragm material, actuator or bonnet style, and documentation expectations should all be checked before quoting.
How Triplex helps
Triplex helps translate the process problem into a practical ITT body selection so the valve package fits the line, the cleaning method, and the maintenance plan.
What Triplex will want to know.
Good valve recommendations come from process context. A few details up front prevent a lot of expensive back-and-forth later.
| Selection point | Why it matters | Triplex note |
|---|---|---|
| Process purpose | Shutoff, sample, purge, drain, divert, tank outlet, or aseptic barrier duty changes the correct body geometry. | Start with what the valve has to do in the process, not just the valve size. |
| Cleanability and hold-up | Dead legs, drainability, and internal volume can matter as much as pressure and temperature. | Send sketches or photos when the valve location is part of a skid or vessel connection. |
| Topworks and diaphragm | The body decision should be made with bonnet/actuator and diaphragm material in mind. | Triplex can help pair the body with manual or pneumatic operation and the right diaphragm review. |
Manufacturer literature and related Triplex resources.
Use these documents as a starting point, then confirm final selection against the actual process conditions.
Keep the selection connected to the full ITT valve platform.
Valve body overview
Compare this item against related ITT options before narrowing the valve package.
PlatformPure-Flo diaphragm valves
Review the full Pure-Flo platform around body, diaphragm, bonnet, actuator, and controls decisions.
PlatformEnviZion platform
Use the EnviZion family page when the valve package belongs in that platform conversation.
Need help applying Multiport Divert?
Send the valve size, connection style, product, process conditions, cleaning/sterilization method, actuation preference, controls needs, and any documentation requirements.
Talk to Triplex
